24 Port Passive PoE Injector with 48V 120W Power Supply for 802.3af Devices – 10/100 Fast Ethernet Capability

Add PoE to any switch
Replace up to 24 individual injectors with this single 10/100 POE module

Features
Extend power to 328 ft or 100 meters
Rack mounted PoE injector
24 shielded RJ45 ports with Data + Power out
Power per port limited to 350 ma, self resetting PTC fuse per port
24 shielded RJ45 LAN Ports for data input from your switch
Dual DC power jacks – primary and secondary DC power
LED power status
10/100 operation
802.3 af compatibility with Mode B power pinout (pins +4, 5 -7, 8)

Compatible Devices:
WiFi Access points
IP Cameras
IP Phones
Other 802.3 af devices

Included in the box:
48-volt, 120-watt UL/CE/FCC certified power supplies
24 Port Midspan PoE Injector
NOTE: All devices receive the same voltage (48 volts) and share power up to 120 watts. Check your device specifications for power needs, most IP phones require under 4 watts. To add additional power, use the secondary screw terminal to add a 2nd 48v120w power supply (sold under product name WS-PS-48v120w) for redundant operation or higher power

Other products from WiFi-Texas
We offer 10/100 and gigabit midspan injectors, PoE switches, and PoE splitter/converters for non-PoE devices.
GPOES-8-7AB-48v60w: 8 port gigabit switch
POE-8-48v60w: 8-port midspan injector with 10/100 speed data
GPOE-16A-48v120w: 16-port gigabit midspan injector
POE-12-48v120w: 12-port midspan injector with 10/100 speeds
PoE-Tester-Gen2: Voltmeter to display power used by a device
5v and 12v splitters