| Product SKUs |
| MBD-X9DR3-F -O |
X9DR3-F (Standard Retail Pack) |
| MBD-X9DR3-F -B |
X9DR3-F (Bulk Pack) |
| Physical Stats |
| Form Factor |
E-ATX |
| Dimensions |
12″ x 13″ (30.5cm x 33.2cm) |
| Processor/Cache |
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
|
| Note |
† BIOS version 3.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| Cache |
Up to 30MB |
| System Bus |
QPI up to 8 GT/s |
| System Memory |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type |
- 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
- * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
|
| DIMM Sizes |
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM |
| Memory Voltage |
1.5 V, 1.35 V |
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| Chipset |
Intel® C606 chipset |
| AHCI SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| SCU SATA (Storage Controller) |
SATA 2.0 3Gb/s with RAID 0, 1, 10 |
| SAS |
- SAS from C606
- RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
Matrox G200eW |
| Input / Output |
| SATA |
- 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
| SAS |
8 SAS/SATA ports |
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
11 USB 2.0 ports total
(4 rear + 6 via header + 1 Type A) |
| Video |
1 VGA port |
| Serial Port / Header |
2 Fast UART 16550 ports: 1 rear and 1 header |
| DOM |
1 DOM (Disk on Module) power connector |
| TPM |
1 TPM 1.2 20-pin Header |
| Expansion Slots |
| PCI-Express |
- 3 (x16) PCI-E 3.0 slots
- 3 (x8) PCI-E 3.0 slots
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
| System BIOS |
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard Support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| Management |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI / APM Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| PC Health Monitoring |
| CPU |
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
CPU / System Overheat LED |
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
|